Step by step guide to set up. Video instructions will be coming soon...
- Connect power lead to driver via 3 pole mains connector
- Connect 1 wago on to each of the driver outputs.
- See images below for connection, Check which driver you have and follow appropriate diagram.
- Check and make sure there no exposed wires. Once satisfied plug in and test light.
- Attach hanging kit in pre drilled holes
- The driver does not attach to the heatsink. Although you can rest it there be careful as it may slip off. We suggest hanging it from an S hook at the top of your grow room. This will also keep it cooler and increase lifespan.
- Hang the light a minimum of 12 inches away from canopy during flower. Can be more during veg 18 inches suggested.
